Commercial ducted · Inverter

A++ / A+

Yamato R32 YD42T1 DC Inverter ducted air conditioner

Yamato ducted units use DC Inverter technology and R32 refrigerant, run quietly and cool efficiently even at -15°C, which makes them suitable for server rooms. They are Wi-Fi ready, have a silver-ion and activated-carbon filter, work on an unstable mains supply, and at only 250 mm high they fit discreetly into a false ceiling.

Capacity — 7 models in the series

Capacity
42.000 BTU
SEER / SCOP
6.10 / 4.00
Min. sound pressure
43 dB(A)
Rated current
19.50 A / 17.70 A
Cooling operation
-15°C ~ 50°C
Power supply
1 Ph-220V-240V-50Hz
Request a quote Buy online

Code YD42T1

Features

Everything the unit does for you

  • Wi-Fi control

    The units can be controlled remotely over Wi-Fi. Through the Wi-Fi module built into the indoor unit, you can control the air conditioner from a distance with the dedicated app on a smart mobile device.

  • Condensate pump included

    Ducted units have a built-in condensate pump, so the water is lifted and drained up to 1,200 mm above the mounting position of the indoor unit.

  • Starts over a wide voltage range

    The units work normally even where the mains voltage is unstable or too low: from 176 V to 265 V for single-phase units, and from 304 V to 458 V for three-phase ones.

  • Auto-restart

    After a power cut, once the supply comes back, the air conditioner restarts automatically, keeping the settings it had before.

  • Self-diagnosis

    To make maintenance and servicing easier, if a fault occurs the error code is shown on the LED display of the indoor unit.

  • Eco mode

    In Eco mode, the unit reaches the temperature you set in the shortest time, then runs at a reduced frequency, holding the temperature while using less energy.

  • Timer

    You can program the unit to switch itself on or off, in the operating mode and at the temperature you want.

  • Sleep mode

    The function optimises how the unit runs while you sleep, by automatically adjusting the temperature curve, for greater comfort and lower energy use at the same time.

  • Intelligent pre-heating

    In heating mode, the indoor unit only starts blowing air once the evaporator has reached a temperature that avoids exposing you to a stream of cold air.

  • Safety lock

    The controls can be locked, so the settings cannot be changed by accident or by someone who should not change them.

Documentation

Manuals and useful documents

Technical specifications

Full data for this model

Model YD42T1 · tolerance +/- 5%

Function Cooling / Heating
Cooling capacity 12000/42000/45000 BTU (min/nom/max)
Heating capacity 13000/46000/51000 BTU (min/nom/max)
Power supply 1 Ph-220V-240V-50Hz
Seasonal energy efficiency ratio, cooling (SEER) 6.10
Seasonal coefficient of performance, heating (SCOP) 4.00
Energy efficiency class, cooling A++
Energy efficiency class, heating A+
Power input, cooling 0.28/4.28/4.81 kW (min/nom/max)
Power input, heating 0.40/3.88/4.11 kW (min/nom/max)
External static pressure — nominal 50 Pa
External static pressure — range 0 - 120 Pa
Outdoor operating temperature range, cooling -15°C ~ 50°C
Outdoor operating temperature range, heating -15°C ~ 24°C
Rated current, cooling 19.50
Rated current, heating 17.70

Support & Service